Comments on Unified Communications with Microsoft: MP-114 pre-configured BOARD.INI for Lync 2010

Sorry, I'm new to Lync. I'm used to Broad...

2012-02-25T05:27:44.836-05:00

Sorry, I'm new to Lync. I'm used to Broadsoft and other VoIP systems.

I am trying to deploy a few ATAs and/or IP phones into home offices. They would communicate with my Lync server over the public net. The home offices are DHCP and of course the ATAs and IP phones are too. From all the excellent instruction I am reading, I don't see any way to configure an ATA (PSTN Gateway) like an MP114 or HT502 with DHCP to communicate with my Lync server.

Am I to assume that a prerequisite to having a remote ATA is that it must have a static IP?

Or am I missing something?

Thanks in advance.

Christian

Is there anyone who tried to use AudioCodes/4FXS w...

2011-10-06T04:39:59.236-04:00

Is there anyone who tried to use AudioCodes/4FXS with cisco Callmanager 8.0 ???

Matt, Firmware 6.20 is indeed a lot different in m...

2011-09-13T10:43:21.646-04:00

Matt,
Firmware 6.20 is indeed a lot different in meaning of logically grouping features on the menus. I have not tried to load the .ini file directly to 6.20 but have upgraded to 6.20 from previous version while the posted .ini file was loaded.

I am currently out of time to test your scenario but… as a quick workaround you could downgrade the FW, load the file, make the configuration changes and upgrade to 6.20 for better manageability.

Drago

Hi, Tried to load your configuration on to a MP-1...

2011-09-13T10:31:28.612-04:00

Hi,

Tried to load your configuration on to a MP-114 with the 6.20 firmware and it looks like it lost its IP. Couldn't connect and had to do a factory reset. Do you have any detail write up of the different configuration steps that you went through in order to configure the MP-114 and get the board.ini that you have posted?

Thanks!

FXS (Foreign eXchange Subscriber interface) connec...

2011-08-20T18:04:08.609-04:00

FXS (Foreign eXchange Subscriber interface) connects the gateway to the PSTN world. FXO (Foreign eXchange Office interface) connects the gateway to analog devices. Connection to Lync server itself does not depends of the number (or lack of thereof) of FXS and FXO ports.

2FXS+2FXO model only means that we can have two PSTN numbers and 2 analog devices used with Lync server. Gateway with 4FXO ports could be used to provision four analog devices in Lync, but no PSTN connectivity.

The reason I selected to publish the above .ini file is because it is sort of universal. If you import it in to a 4FXS port device, the FXO settings will be ignored, but still FXS – respected. Same applies to 4FXO port device.

Hi, i was looking to try to get this to work when ...

2011-08-20T17:49:30.804-04:00

Hi, i was looking to try to get this to work when an MP-114, but i see i must have the model with FXO ports. is this true in the sense i cannot use the MP-114 4FXS model with Lync just for calling?

seamvp, I am sorry for the late reply - I was awa...

2011-07-08T10:02:54.872-04:00

seamvp,

I am sorry for the late reply - I was away for few days. Please email me here: temp2 at lynclog.com and we will go from there.

Hi can i get your email. i need some help on confi...

2011-07-03T10:38:20.807-04:00

Hi can i get your email. i need some help on configureing MP 118 with lync. i followed all ur steps and i think i got most of it right. when i call from outside it rings and the call is recived from mp-118 but its not transferd to lync. when i dial land line from lync clinet it connect. im not sure what is missing. any help will be really appriciated